Registered: 1279740950 Posts: 38
Reply with quote #1
I have a Ray Dish going back to 1985. In continuous use on C Band. Never got it to work on Ku. Question #1: Has anyone gotten a 10 1/2 foot RayDx to work on Ku? Anything to share? Five years ago, we had golf-ball sized hail which did the reflector no good. I was able to work the reflector mesh back into shape by hand except for two panels which are still pretty rough. Question #2: I'd like to replace them but don't know who might be selling them. Any suggestions? Thanks Much. Rick Rikoski
__________________ Rick W9ZD Currently:10' Winegard Pinacle with AJAk 180; RayDx 10.5; Orbitron Spinclination 8'; Sadoun 6' Steel. Manhattan receivers migrating to Icecrypt. In 1961did video design for the ITT Transportable Earth Station. First home dish was a 10' fiberglass; Boman receiver and a 120 degree lnb.
Registered: 1235567314 Posts: 2,858
Reply with quote #2
There is almost "no" new old stock laying around to buy. All those dish makers from way back are gone as far s making home use sat dishes. The Pros like DH antenna are still making commercial grade dishes. There are no mesh commercial grade dishes out there, just solid in metal and some in glass molded. While there is still some of the metal mesh sheets being made the cost is rather high. You can not find many new parts sources for 30 ear old autos and even less sources for our old sat dishes. Perhaps find another same model dish and just use the best parts from two dishes to build up one good dish. I have the smaller Raydex dish here and the holes appear to big in it for good Ku reception.
I went out in the yard with a sharped lead pencil and the Unimesh has expanded metal like the Parclipse and Raydex but only the Unimesh has smaller holes which work well for Ku. The Birdview dish "with holes" has large round holes not very Ku friendly while two other dishes with a mesh like panel have much smaller round holes and are just fine with ku freqs. They still make most of these metal panels but again the cost is just too high for most of us hobby folks. You need start out with a dish which comes with the smaller holes to get good to great Ku results. I like the Raydex dishes but perhaps not the best choice for Ku without an $$$ investment in better mesh panels. Replacement panels have been seen in the past but rare and much dollars to own and ship them. https://www.google.com/search?q=metal+mesh+panels&tbm=isch&tbo=u&source=univ&sa=X&sqi=2&ved=0ahUKEwjwlO6NrPXSAhVEWCYKHT48C6cQsAQIJQ&biw=1291&bih=1307#spf=1 __________________
Never throw it away--almost never!
Registered: 1191279667 Posts: 3,662
Reply with quote #3
When I had a Raydx 10.5' dish Ku worked very well on mine. The holes in the mesh weren't very big so it worked well. The old test from way back was if you can fit a #2 pencil through your mesh than it wasn't any good for Ku. The smaller the holes in the mesh the better.
Emil __________________ Icecrypt 1600 CHD SE, Icecrypt 3750 CHD, Linkbox 9000i Local, Wetek Play, SYNOQ SR1, 2 AZBOX ME's, AZBOX Premium Plus & Elite HD, Manhattan RS1933, Openbox S10, Vantage HD1100S, Prof 7500, Pansat 9200HD w/S2+board, 2 Quali-TV's, Sonicview 8000HD, Toshiba TRX 2220, Motorola DSR905, 10ft Winegard, 90cm Ariza, etc.......
Registered: 1220796243 Posts: 817
Reply with quote #4
I think the amateur radio handbook or the ARRL antenna book I forget which somewhere...
Says... The holes must be smaller than 1/10 of a wavelength. __________________ Taylors, SC LinkBox 9000i, AZBox Prem+, Fortec Star 90cm with H-H Motor & Invacom (Ku) Linear/Circ 4 output LNBF, 7.5' UniMesh 56" fiberglass Prime feed with invacom SNH-031 (Ku).
Registered: 1196641561 Posts: 5,143
Reply with quote #5
depending on how the dish is constructed, ya might be able to remove the damaged mesh panels, straighten them out using a mallet on a flat surface or something, then re-install em. But most of these dishes are pretty old, and the hardware holding them together may be shot too. So ya could easily go from frying pan to the fire.
__________________ Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner, Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed. ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html
Registered: 1254958626 Posts: 9,611
Reply with quote #6
Have a Raydx here and it is a very nice built dish..Not set up but I see the quality of this dish....What a very nice mount!!!!....The mount in my opinion is worth a heck of alot more than the dish!!!.Have seriously thought about retrofitting the mount for a 1.2 Ku dish.
Already sketched out some drawings for this if anyone wants them. Dough rolling pin works great for old mesh. __________________ Dish`s--10' KTI,10' Button Hook,10' Unimesh x2. 1.2 Ch Masters parked at 91,103. 1.2 Ch Master with factory polar mount tracking from-58w-127w -Western Ku Dish. 1.2 Ch Master with factory polar mount tracking from-12.5w-81w -Eastern Ku Dish. Positioners--Gbox,Vbox`s. Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982,TBS 6902. GOD BLESS AMERICA.
Registered: 1235567314 Posts: 2,858
Reply with quote #7
On a near the same type project I started removing the expanded metal panels from a 12 foot paraclipse dish and still am only half way done with the over 500 wire clips which hold this dish mesh onto the metal ribs. I hope before I expire to bring this dish frame back to life with better quality mesh coverings. I am not getting any younger and I keep finding other better solid glass dishes which need much less work to put back into sat hunting service. Thus I never get the paraclipse dish any further along with the repair work.
Never throw it away--almost never!
Registered: 1350780159 Posts: 533
Reply with quote #8
Originally Posted by
Hockeynut Have a Raydx here and it is a very nice built dish..Not set up but I see the quality of this dish....What a very nice mount!!!!....The mount in my opinion is worth a heck of alot more than the dish!!!.Have seriously thought about retrofitting the mount for a 1.2 Ku dish. Already sketched out some drawings for this if anyone wants them. Dough rolling pin works great for old mesh.
Great,never thought about rolling pin!
Got lucky,actually with both my 11 footers,only couple panels in the one got yesterday that is basically out of the slot on one side,but not beat up bad.
The one i already had is the Radyx.Hell of a mount & dish! Got mount & half that was still together mounted today.All stainless or aluminum screws/bolts/mount,etc.Has matching UST-705 i believe. The other one,do not believe is a Radyx.Can see pics i posted of it yestetday.No where near the quality of the Radyx,IMHO. It was worst one i've seen with moss/algea/ or whatever covers these dishes. Hopefully finish getting Radyx up tom. __________________ TRAXIS 6100HD,MicroHD Pro,2-X2 M1 HD+,OpenBox s9,Skybox F3s,2 Skybox F4's,Nexus-S & TwinHan 1030,Neusat SP6000,CNX Nano 2,Nfusion solaris,Pansat 2500a's,Coship TRX-1800,TRX-80,TRX-1520 UHF,TRX-1800.ORB 5000,TRX-1420,Dishes-1 11 ft Radyx,4-10 FT Mesh,1-10.5 Ft FG,1-8.5 FG,Mesh,1-10.5 FG,4 Ft CM Ku,6 Charter Dual Linear LNB 1 Meter,2 1.0 Meter PS,2-Superdishes.