Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 10 of 10     «   Prev   7   8   9   10
N2bnfunn

Registered:
Posts: 508
Reply with quote  #136 
Well the driver crashes and when you restart E2 the signal will be just up and down, and only lock for 1 second and go up and down.. 
__________________
Octagon SF4008 4k, Dreambox 900 4K,  Link Box 8000HD,Uniden Supra, 10foot SX-10 Orbitron Satellite BUD Norsat 3220 NORSAT 1106 Chaparral Bullseye II receving Satellites from 34 thur 139
mountaineer

Avatar / Picture

Registered:
Posts: 2,730
Reply with quote  #137 
What is the sat and TP you are trying? 
__________________
3 Edison OS mini's, 3 Openbox S10s, 2 Openbox S9's, NFusion HD, 2 Prof 7500's, Genpix Skywalker 1, 2 Optibox Anacondas, Azbox me, Azbox minime, 2 Jynxboxes, ismart m100, izzibox, TBS 6982, Vigica C60s, Optibox Raptor, azbox Bravissimo, TBS 5922SE, TBS 5980 (Broke), and TBS 6902.
 36" KU Dish Linear, 10 ft prime focus Mesh, 7.5ft prime focus mesh dish C and KU.
7 Stationary KU dishes.
N2bnfunn

Registered:
Posts: 508
Reply with quote  #138 
It does not matter it will do the same on all.
__________________
Octagon SF4008 4k, Dreambox 900 4K,  Link Box 8000HD,Uniden Supra, 10foot SX-10 Orbitron Satellite BUD Norsat 3220 NORSAT 1106 Chaparral Bullseye II receving Satellites from 34 thur 139
rempfer

Avatar / Picture

Registered:
Posts: 913
Reply with quote  #139 
Quote:
Originally Posted by mountaineer
A good place to test this is with Velocity on 110.

I can't seem to find any specifics re:  Velocity on 110.  Could you give me transponder settings?  I do have Genpix Skywalker-1 showing up in the latest OpenATV thanks to your instructions!
Quote:
Originally Posted by mountaineer

3. There are packaes for may other tuners there. If you have a diffrent one it may be listed..but I have not tested it. But you may want to try it and post results. STVO90X is there which I think you use for TBS cards though not sure...and it may need more than one package and the others I would not know about...but someone with a TBS card may be able to tell.

No luck getting my (USB) TBS5925 to show up yet.

Thanks, mountaineer!
mountaineer

Avatar / Picture

Registered:
Posts: 2,730
Reply with quote  #140 
Rempfer,

 Try 110 here
12399 R 21500   turbo 8psk   Velocity

I believe you will have to set it up as DVB S  8psk.
let me know how it goes.

__________________
3 Edison OS mini's, 3 Openbox S10s, 2 Openbox S9's, NFusion HD, 2 Prof 7500's, Genpix Skywalker 1, 2 Optibox Anacondas, Azbox me, Azbox minime, 2 Jynxboxes, ismart m100, izzibox, TBS 6982, Vigica C60s, Optibox Raptor, azbox Bravissimo, TBS 5922SE, TBS 5980 (Broke), and TBS 6902.
 36" KU Dish Linear, 10 ft prime focus Mesh, 7.5ft prime focus mesh dish C and KU.
7 Stationary KU dishes.
mountaineer

Avatar / Picture

Registered:
Posts: 2,730
Reply with quote  #141 
Also rempfer for the 5925 I dont think it will work on azbox  kernel too old...You can go to plugins...download ...and under drivers you should see a TBS package. Download it and put .fw file in lib/fw and see what happens. i dont think it will work for azboxes.  let us know!
__________________
3 Edison OS mini's, 3 Openbox S10s, 2 Openbox S9's, NFusion HD, 2 Prof 7500's, Genpix Skywalker 1, 2 Optibox Anacondas, Azbox me, Azbox minime, 2 Jynxboxes, ismart m100, izzibox, TBS 6982, Vigica C60s, Optibox Raptor, azbox Bravissimo, TBS 5922SE, TBS 5980 (Broke), and TBS 6902.
 36" KU Dish Linear, 10 ft prime focus Mesh, 7.5ft prime focus mesh dish C and KU.
7 Stationary KU dishes.
rempfer

Avatar / Picture

Registered:
Posts: 913
Reply with quote  #142 
Well, this is embarrassing.  I once was able to find the right option to get that list of add-ins that categorized by "drivers+", etc., where you could expand the category list and scroll up/down with the number pad, but I can't find it again.  I'm using OpenATV 5.3 I think.  So I can't find the "TBS package" since I can't get to the list.

Not able to get the Genpix Skywalker-1 to display any channels, but I did get it to scan in the C-band TBS stuff from 125W, but it won't play the streams.

My mind is numb and since I can't find the TBS package menu, I probably better take a break from this for a few.
mountaineer

Avatar / Picture

Registered:
Posts: 2,730
Reply with quote  #143 
Menu....plugins....press the green button to view downloadable plugins....Scroll down to Driver(s)...then see if TBS Package is there.

If not ...then see if software manager is in plugins..if it is 


select it...select advanced ...then select packet management. Once they load then start scrolling down the list until you see TBSpackage. Select and install...restart box.

If software manger is not in plugins then it is usually in menu ...setup ...

My mind needs lots of rest sometimes when dealing with these boxes [smile]

__________________
3 Edison OS mini's, 3 Openbox S10s, 2 Openbox S9's, NFusion HD, 2 Prof 7500's, Genpix Skywalker 1, 2 Optibox Anacondas, Azbox me, Azbox minime, 2 Jynxboxes, ismart m100, izzibox, TBS 6982, Vigica C60s, Optibox Raptor, azbox Bravissimo, TBS 5922SE, TBS 5980 (Broke), and TBS 6902.
 36" KU Dish Linear, 10 ft prime focus Mesh, 7.5ft prime focus mesh dish C and KU.
7 Stationary KU dishes.
N2bnfunn

Registered:
Posts: 508
Reply with quote  #144 
Quote:
Originally Posted by rempfer
Well, this is embarrassing.  I once was able to find the right option to get that list of add-ins that categorized by "drivers+", etc., where you could expand the category list and scroll up/down with the number pad, but I can't find it again.  I'm using OpenATV 5.3 I think.  So I can't find the "TBS package" since I can't get to the list.

Not able to get the Genpix Skywalker-1 to display any channels, but I did get it to scan in the C-band TBS stuff from 125W, but it won't play the streams.

My mind is numb and since I can't find the TBS package menu, I probably better take a break from this for a few.





Yeah I am having the same problem with my skywalker-1 it will show up, but you can't scan any TP's???

__________________
Octagon SF4008 4k, Dreambox 900 4K,  Link Box 8000HD,Uniden Supra, 10foot SX-10 Orbitron Satellite BUD Norsat 3220 NORSAT 1106 Chaparral Bullseye II receving Satellites from 34 thur 139
mountaineer

Avatar / Picture

Registered:
Posts: 2,730
Reply with quote  #145 
There seems to be an issue with the latest build etc. I tried the genpix on the latest HDMU on my minime...it did as you suggest...saw tp's but no scan nor send streams.
If you wish to try the genpix I recommend that you go to the persian empire image. IT IS A MODIFIED 3.9.2 Kernel so you will lose everything!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ALSO YOU CAN NOT CHANGE THE REFRESH RATE LEAVE IT AT AUTO!!!!! or get green screen of death.




It has everything built in...fw...drivers ... plugins etc. Just load the image...plug in genpix in the back.....load sat and channel list...setup tuner...set genpix to be mirror of tuner A .......go to menu...setup...service searching....satellite dish setup ... and set it for tuner B. Then you should be able to watch and scan with genpix...I could....but remember there are quirks....once it loses tune or stream it will not get it back without a restart...also turbo 8psk must be set to DVB S   8psk.

Please see first few posts of this thread.

Images are here:

https://mega.nz/#F!7sBTRKCD!M8jFCWZJvhBgevEyKZffjw

images for Azboxes, Vu, Dreambox, and xtend.

I would go and download the images....they may go away someday.


USE AT YOUR OWN RISK!!!!!



__________________
3 Edison OS mini's, 3 Openbox S10s, 2 Openbox S9's, NFusion HD, 2 Prof 7500's, Genpix Skywalker 1, 2 Optibox Anacondas, Azbox me, Azbox minime, 2 Jynxboxes, ismart m100, izzibox, TBS 6982, Vigica C60s, Optibox Raptor, azbox Bravissimo, TBS 5922SE, TBS 5980 (Broke), and TBS 6902.
 36" KU Dish Linear, 10 ft prime focus Mesh, 7.5ft prime focus mesh dish C and KU.
7 Stationary KU dishes.
N2bnfunn

Registered:
Posts: 508
Reply with quote  #146 
Thanks for your info, I just wish someone could modify the current firmware to work with the skywalker-1  
__________________
Octagon SF4008 4k, Dreambox 900 4K,  Link Box 8000HD,Uniden Supra, 10foot SX-10 Orbitron Satellite BUD Norsat 3220 NORSAT 1106 Chaparral Bullseye II receving Satellites from 34 thur 139
Grimgnaw

Avatar / Picture

Registered:
Posts: 43
Reply with quote  #147 
There is a Prof 7500 for sale on Ebay right now.
__________________
9'C/Ku dish, VBOX7, Pansat 9500hdx, Prof 7300 wi ProgDVB
10' C/Ku dish, VBOX7, Linkbox 8000HD Local
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!