Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Forum Header Ad
This Forum is Brought to you by "Ricks Satellite"
www.RicksSatelliteUSA.com or www.GoFastMotorsports.com or call 816-228-1801
Your US Supplier for Free To Air Digital Receivers, Feed Horns, LNB's & LNBF's, Venture Made in the USA Actuator Arms and many other products!

"Coming Soon... The NEW SX88 Octagon H.265 HEVC HD DVB-S2 Multistream Satellite Receiver!"
Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 9      Prev   1   2   3   4   5   Next   »
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #16 
BLScan 1.0.0-594
  • DiSEqC 1.0 multiswitches support - send DiSEqC-commands for polarity/band change.
CrazyScan 1.0.0-595
  • DiSEqC 1.0 multiswitches support - send DiSEqC-commands for polarity/band change.
  • Change DiSEqC 1.1 port numbers to 1-16.
P.S. SDK and samples sources updated.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
tempo

Registered:
Posts: 204
Reply with quote  #17 
StreamReaderEx-BDA 1.0.6.635

  • Optimized tuner control for STV090X cut3.0. It would be better RFScan speed on Omicom S2 card with this chips (STV0900AAC/STV0903BAC) (upto 30%, but anyway RFScan speed would be 2 times slower than on demod chips cut2.0, STV0900AAB/STV0903BAB). There is also a possibility of faster RFScan speed on TBS6925 V2.
  • Added experimental support for TT S2-3200 (STB6100/STB0899 and LNBP21). There is full support of RF,IQScan, imitation support of BLScan (it is necessary to describe real SR of transponder as "MinSR" value). After OS boot (after driver's start) but before start CrazyScan on S2-3200 it is necessary to start any DVB software working with TT S2-3200 and tune to any transponder (so demod chip will be fully initialized, and streamreader will work properly).
  • Added option to change possible intermediate frequencies for scan - see options IFStart, IFStop in config file. 950-2150 Mhz by default (can be set < 950 MHz and > 2150 MHz).
  • Debug RFScan mode - instead of rationed levels in dBm there given initial values of 'AGC Gain' registry. This debug mode is for RF-level scale calibration on different DVB cards with modulator help. See an option RFScan in config (0 activates debug mode; by default 1 - usual mode, values in dbm).
  • Added DirecTV(DSS) transponders blindscan support for all supported cards on STV090x demod.
  • Disabled restricted support of inside-driver BlindScan TBS.

BLScan 1.0.0.630

  • Fixed bug with incorrect MinSR value message.
  • Fixed bug in diseqc 1.0 control for multiswitches in the case of single-band LNB.

CrazyScan 1.0.0.635

  • Dialog fixes.
  • IQScan point size now stored in options.
  • Disabled zoom before spectrum analyzer start.
  • Added support for debug mode in StreamReaderEx - change of IF freq range and debug RFScan mode. Options from streamreader.ini used in CrazyScan too.
  • Added option to write stream into .ts file while streaming after successful BlindScan.
  • Traffic counter now revamps even if there isn't TCP-connection with client. Traffic counter brightly lights when connection is active.
For streaming DSS-stream and other specific non transport DVB-S2 streams (Generic continous, usual with IP traffic) it is necessary to disable PID-filtration in streamreader (option NoPidFilter=1 in StreamReader.ini).
 
To receive DSS-stream in TSReader 2.4.86+ use fixed TCP source dll. By preliminary tests TBS6925 and Prof 7301/8000 can pass DSS-stream through mediabridge (bus controller). On devices with SAA7146 bridge this can be impossible, because packets will be complemented with trash to 188 bytes (in DSS one packet of stream is 131 bytes).
 
P.S. SDK and samples sources updated.


__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #18 
Test builds. Need testing.

StreamReaderEx-BDA 1.0.6.665

  • BandStacked LNB support. LOFSW=22000 and LOF1 for V/R polarization, LOF2 - for H/L
  • TBS8910/Prof6200/TeVii S420 with STB6000/STV0288 support. BL,RF,IQScan.
  • Minor fixes for STB6100/STB0899 (TT S2-3200)
  • Detect proper modcode for S2-transponder with many dummy PL.

BLScan 1.0.0.665

  • BandStacked LNB support. LOFSW=22000 and LOF1 for V/R polarization, LOF2 - for H/L
CrazyScan 1.0.0.667

  • BandStacked LNB support.
  • Minor fixes in BL&IQScan dialog.
  • Improved checking LNB parameters.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #19 
+ P.S. SDK and samples sources updated. BandStacked LNB related changes in BLScan sources - proper detection allowed frequeny range for this specific LNB type.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #20 
Test builds. Need testing.

StreamReaderEx-BDA 1.0.6.674

  • Restricted support for TT Connect USB2.0 S2-3600,3650 (STB6100/STB0899). Not tested !
  • Fix detection BDA extension type for TBS QBox'es (59x0). Need test !
  • Remove not useful warning messages from log.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
ACRadio

Avatar / Picture

Moderator
Registered:
Posts: 3,365
Reply with quote  #21 
Please remember that this thread is for file posting only...discuss the software here...

http://rickcaylor.websitetoolbox.com/post?id=5183609


__________________
Visit The NEW ACRadio Dish Farm
Check out FFCN Radio...now available on ROKU
Like FFCN Radio on Facebook
Visit the Google Play Store, BlackBerry World, or the App Store for the FFCN Radio official mobile app for smartphones/tablets.
babadem

Avatar / Picture

Registered:
Posts: 721
Reply with quote  #22 
This is interesting. Never saw this before.

__________________
Amiko-A3, AZBox Me, MicroHD, and TBS6903. DG-380 Motor (43.1°W to 127.0°W), on 1.2M Geosat Pro.  3ABN Dish @30.0°W. 2nd 1.2M looking @103.0°W. 12FT Paraclipse Dish looking from 37.5°W to 111.1°W.
tempo

Registered:
Posts: 204
Reply with quote  #23 

StreamReaderEx-BDA 1.0.7.718

  • Improved stability of polarization switching on Prof/TBS cards (no relation to TBS6925 V2).
  • Experimental support of DVBS2-streams streaming in the form of frames (FrameMode option in config). This option can work only on TBS6925 V2. On other supported devices media-bridge and drivers allows to pass packetized stream only (DVB TS, packet size 188 byte).
CrazyScan 1.0.0.729

  • Added possibility of spectrum picture auto export (autosave) in loop (cyclic) mode.
    _<pass number> adds to the file name.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
tempo

Registered:
Posts: 204
Reply with quote  #24 

StreamReaderEx-BDA 1.0.7.733

  • Added check of Prof 7500 driver's version before direct control start. If there is original driver (not fixed), then direct control will not initialize to avoid freezing.
The same revision are in sub-modules for ProgDVB for TBS/Prof 1.0.0.734:
http://crazycat69.narod.ru/sattelite/ProgDVB/TBS-BDAExt.zip
http://crazycat69.narod.ru/sattelite/ProgDVB/TBS-BDAExt64.zip
and in special version of BDA2-module 0.2.1.735 for AltDVB 2.2:
http://crazycat69.narod.ru/sattelite/AltDVB/dev_bda2driver.zip

CrazyScan 1.0.1.3

  • Added marking of found carrier on the spectrum picture. After successful blindscan of any peak on the spectrum, five markers appears: central frequency with text marker, two borders of carrier corresponding to bandwidth without roll-off factor, and two borders include roll-off factor.
CrazyScan now accessible as Open Source project on SourceForge!

Current CrazyScan 1.0.1.x source files made with MS VC2008 SP1, QT 4.7.x and QWT 6.0.x.

In Download-section there are last reqiured libraries for CrazyScan (at present time there are dlls from QT 4.7.4 and QWT 6.0.1). Also installed MS VC2008-SP1 x86 redist required.

CrazyCat:
"All people wishes to take part in project - please register on SourceForge, send me your ideas and (if possible) their realisation in the form of corrected CrazyScan source files. Besides take part in software development you can also to amuse with formalize of online-documents, wiki. If you wish to localize interface for your national language, you can also take part. Those translations will be added to project and release builds of CrazyScan."

P.S. StreamReaderEx-BDA still required for CrazyScan. 
It will be accessible by old links to crazycat69.narod.ru

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #25 

CrazyScan 1.0.1.5

  • Polish translation added
  • Fix wrong error message if IQScan not supported for some devices
Important for users CrazyScan 1.0.0.x - ReqLibs must be updated ! And MS VC2008SP1 x86 redist installed !


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #26 

StreamReaderEx-BDA 1.0.7.756

  • Restricted support for TBS BlindScan restored and fixed support for TBS QBOX with BlindScan (5921, 5922, 5980).
  • BLScan support for TBS x922 confirmed, performance/quality comparable with original TBS BlindScan tools for this devices.
  • Some preliminary support for Geniatech-designed devices with Montage TS2020/DS3000 chips. Used direct chip control via driver specific I2C-access calls. Now only BLScan, very slow, but relatively accurate. Need more info about Montage tuner/demod programming for automatic carrier search without specified SR.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #27 

StreamReaderEx-BDA 1.0.7.775

  • Fixed IQScan for all full-supported devices. Twice speedup + constellation picture for Prof 7500 now correct for 8PSK,APSK. BIG BUG CATCHED
  • Full support for TBS QBox-CI (5980) and 5925. Required latest drivers, with I2C-access calls support.
  • Not-tested full support for TBS QBox(5910) and QBox2(5920). Still wait I2C-enabled drivers from TBS.
BLScan 1.0.0.770
  • just recompiled and build number increased
P.S. SDK and samples sources updated.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #28 

StreamReaderEx-BDA 1.0.7.781

  • Some minor fixes in tuner AutoControl for STV090x cut 2.0.

CrazyScan 1.0.1.6

  • Added preset for some Ka-Band circular LNB.
  • Replace all Khz, Mhz with KHz, MHz.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
ionut2

Registered:
Posts: 1
Reply with quote  #29 
hy friends..i have a prof 7500 usb dvb-s2 ,you can give a compatible pack software for blindscan for this device? thanks
crazycat

Avatar / Picture

Registered:
Posts: 1,053
Reply with quote  #30 

StreamReaderEx-BDA 1.0.8.800

  • New function - SignalInfo - report detailed signal info after lock (like BLScan, but freq in L-Band).
  • Unlock support for cable/terrestial BDA devices (showed in list), for future support.

CrazyScan 1.0.1.8

  • Refresh modulation params after BlindScan. Use SignalInfo function, so require StreamReaderEx-BDA 1.0.8.800 and newer.
  • Updated polish localization (thanks Mr.Orbita).
P.S. SDK and samples sources updated.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!