Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Forum Header Ad
This Forum is Brought to you by "Ricks Satellite"
www.RicksSatelliteUSA.com or www.GoFastMotorsports.com or call 816-228-1801
Your US Supplier for Free To Air Digital Receivers, Feed Horns, LNB's & LNBF's, Venture Made in the USA Actuator Arms and many other products!

"Coming Soon... The NEW SX88 Octagon H.265 HEVC HD DVB-S2 Multistream Satellite Receiver!"
Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
Hockeynut

Avatar / Picture

Registered:
Posts: 9,632
Reply with quote  #1 
Been checking out the new bird and have found several signals and a feed.This lit up and not sure what it is just yet.

11759 V 30K S2

__________________
Dish`s--10' KTI,10' Button Hook,10' Unimesh x2.
1.2 Ch Masters parked at 91,103.
1.2 Ch Master with factory polar mount tracking from-58w-127w -Western Ku Dish.
1.2 Ch Master with factory polar mount tracking from-12.5w-81w -Eastern Ku Dish.
Positioners--Gbox,Vbox`s.
Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982,TBS 6902.

GOD BLESS AMERICA.
majortom

Avatar / Picture

Registered:
Posts: 5,165
Reply with quote  #2 
Might wanna check it with TSReader, see if ya see any MACs in there.
Looks like it may be data with a LONG frame, which the Prof 7500 apparently can lock, despite being ACM/VCM??


Attached Images
Click image for larger version - Name: 72w_amc3.png, Views: 37, Size: 75.75 KB 

__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html

majortom

Avatar / Picture

Registered:
Posts: 5,165
Reply with quote  #3 
same story on the other one next to it.
Just hasn't been lit up with an active PID yet?

Attached Images
Click image for larger version - Name: 72w_amc3_11800.png, Views: 18, Size: 72.09 KB 

__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html

Hockeynut

Avatar / Picture

Registered:
Posts: 9,632
Reply with quote  #4 
Not ACM/VCM majortom.Another CCM signal just popped up.

11799 V 30K S2

__________________
Dish`s--10' KTI,10' Button Hook,10' Unimesh x2.
1.2 Ch Masters parked at 91,103.
1.2 Ch Master with factory polar mount tracking from-58w-127w -Western Ku Dish.
1.2 Ch Master with factory polar mount tracking from-12.5w-81w -Eastern Ku Dish.
Positioners--Gbox,Vbox`s.
Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982,TBS 6902.

GOD BLESS AMERICA.
majortom

Avatar / Picture

Registered:
Posts: 5,165
Reply with quote  #5 
didn''t see any MACs in the first one either BTW.
There is data there though when I was lookin for sure.
So not sure what it is either.

__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html
ncjay

Registered:
Posts: 366
Reply with quote  #6 
So what orbital position is this one at please?
big_hemi

Avatar / Picture

Moderator
Registered:
Posts: 4,989
Reply with quote  #7 
Quote:
Originally Posted by ncjay
So what orbital position is this one at please?

72W

__________________
10' Winegard - BSC621 C/Ku LNBF - Venture MA818-B24 - V-Box 7 - 8x1 Switch
1.2m Prodelin @ 103W | 90CM @ 72W | 1m Muzak @ 91W | 1m DS3100 (HH120 motor) | All Avenger Universal Ku LNBF's
Icecrypt 3750 & 1600 - Linkbox 9000i Local - AZbox ME (OpenATV 3.3.1) - Prof 7500 - Wetek - Slingbox HD Pro
photoman76

Registered:
Posts: 9,609
Reply with quote  #8 
I'm showing ACM/VCM and Transport Stream on both muxes.
AOL Service.
merkin

Registered:
Posts: 827
Reply with quote  #9 
$012d is causing tsreader to crash when viewing in IP mode

prof7500 is showing acm/vcm here also..not sure why it can hold the lock either?
majortom

Avatar / Picture

Registered:
Posts: 5,165
Reply with quote  #10 
tsreader didn't crash here when I was looking at a ts dump in file loop mode, via wine.
but didn't see any MAC addys showing up either.
Another device I have using the montage m88ds3103 demod locks it also.
And it's not supposed to be capable of ACM/VCM either.
Is it possible since no modcods are changing, it's OK on these devices?
Soon as they start changing modcods someday, would make it go nutso?

Attached Images
Click image for larger version - Name: 72w_11760_modcods.png, Views: 11, Size: 76.33 KB 

__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html

majortom

Avatar / Picture

Registered:
Posts: 5,165
Reply with quote  #11 
photoman, I see the AOL service identified too.

Attached Images
Click image for larger version - Name: aol.png, Views: 50, Size: 119.51 KB 

__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
ricardo's geo-orbit archive: https://web.archive.org/web/20071202191450/http://www.geo-orbit.org:80/sizepgs/tuningp2.html

pendragon

Registered:
Posts: 1,044
Reply with quote  #12 
I thought AMC 3 was bought by Global Eagle to supply in-flight services to airlines:

http://spacenews.com/global-eagles-mystery-satellite-purchase-is-sess-amc-3/

Doesn't look like a hot FTA prospect.
Hockeynut

Avatar / Picture

Registered:
Posts: 9,632
Reply with quote  #13 
That last paragraph from the link....Possibly why I found these here in post # 12?

https://rickcaylor.websitetoolbox.com/post/sunday-schedulefeeds-for-21217-8410910?trail=15

Thanks for the link pendragon.

__________________
Dish`s--10' KTI,10' Button Hook,10' Unimesh x2.
1.2 Ch Masters parked at 91,103.
1.2 Ch Master with factory polar mount tracking from-58w-127w -Western Ku Dish.
1.2 Ch Master with factory polar mount tracking from-12.5w-81w -Eastern Ku Dish.
Positioners--Gbox,Vbox`s.
Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982,TBS 6902.

GOD BLESS AMERICA.
agus0103

Registered:
Posts: 1,126
Reply with quote  #14 
I wasn't aware that AMC-3 was in inclined orbit at 72°W. Has this been the case since the satellite was moved to that location?
photoman76

Registered:
Posts: 9,609
Reply with quote  #15 
Quote:
Originally Posted by agus0103
I wasn't aware that AMC-3 was in inclined orbit at 72°W. Has this been the case since the satellite was moved to that location?


It was probably not inclined when they first moved it there.
Apparently they are not doing any station keeping so inclination will increase with time.
It's currently at 0.128 degrees inclined.
Geo satellites seem to be 0.05 degrees or less inclined.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!