Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
jackjavo

Registered:
Posts: 299
Reply with quote  #16 
@GFM if you're not able to see device settings then you're probably using blindscan.dev for tuning also (in which case there is no device settings menu). Make sure you have bda.dev selected in the add/edit frequencies dialog for the sattelite you're working with to make sure bda.dev is used when tuning.

I've made a patched bda.dev to see if this makes a difference for some of the prof7500 issues (i'm quite sure the correct diseqc messages are sent by the .exe, so it's probably some prof7500 introduced problem, i had a prof a long time ago and used a switch with it but perhaps the code always had issues with Prof USB diseqc code). Moved the prof handling to different interfaces when a Prof 7500 usb device is selected. Please make a backup of your old bda.dev before trying this one as i'm not sure if it might not have issues with older exe versions due to recent changes unrelated to these. With regards to prof, you can try two different sets of interfaces as device type (tools > device settings), TBS (PCI) and QBOX. I've defaulted the Prof to use the QBOX tuning code in this test as i read it should also work with that, perhaps it works better (or worse) only you can tell me as i don't have a prof7500 here to test with (anymore). With regards to TBS devices, please make sure 'tbs new interfaces' is selected in the bda device settings, this test should default to these interfaces as they should be the most recent (if your tbs device does not default to these interfaces make sure you select them). Also i might add, but probably not needed since most here use the app longer than today, for cascaded 1.1 switches make sure you enable 'send diseqc on each transponder change' (tools > settings > diseqc) for correct DiSEqC sending.
re wejones. If the bda.dev works it has some (untested) changes to see if HDHR devices can at least build the graph now.
https://mega.nz/#!a54hzCzJ!KZsDXrc-7B6YFbJ6F15lcoJAalPP4EXqWkxtWc8XcDM
Deviance

Registered:
Posts: 6
Reply with quote  #17 
Quote:
Originally Posted by Deviance
Hello, I have prof7500 USB, and I can't use SmartDVB with disecq 1.1 multiswitch. Other players work well. I tried latesr streamreader, Prof7500_Driver_2.0.0.7_W64_fixed, CrazyBDA driver but still the same result. Is there a patched BDA.dev for prof7500? Thanks..


Hello, I have chanced its adaptor with 12v 3a adaptor and it works like a charm!!

p7500.jpg 

 
Attached Files
zip bda.zip (129.09 KB, 1 views)

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!