For TSReader 2.8.46 and newer use my new StreamReaderEx-proxy source module.
- Unpack my latest StreamReaderEx-BDA to root TSReader folder.
- Unpack StreamReaderEx-proxy source module to TSReader\Sources.
Features:
- Support selection active device (see streamreader.log for numbers)
- Support any kinds of BDA-devices (DVB-S,C,T; ATSC/QAM; ISDB-T/S)
- Support standalone commandline parameters for initial tuning (depend from selected tuner type)
- Tuning dialog depend from selected tuner type (ATSC/QAM; DVB-S/T/C; ISDB-T/S)
- DiseqC 1.x support for many BDA-drivers (complete list vendors-specific extensions)
- Output basic signal statistic (Signal Strength, Quality in %, lock status)
- Optional output extended signal statistic (RFLevel, SNR, BER). Supported for most devices with direct hardware control (e.g. all supported in my CrazyScan/BLScan and etc.)
- Optional DSS stream support for TBS 6925, Prof 7301/8000 (and maybe for Genpix with BDA-driver). Just set DSS=1 in streamreader.ini. ONLY DSS stream supported in this mode !
NEED TESTING with DVB-T/C, ATSC devices !
Some example screenshots:
TSReader 2.8.47c standard with Omicom S2 (direct hardware control mode DVB-S/S2 support). Some DVB-T,16QAM,2/3 mux via satellite 31.5E in 27500,8PSK,5/6 multistream:

TSReader 2.8.47c standard with TBS6220 (direct hardware control mode DVB-C/T/T2 support). DVB-T2,256QAM,5/6 mux.
