Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
midwestmac

Registered:
Posts: 2,275
Reply with quote  #1 
This is a new one @113w
12091 V 3616 

Weak signal for me but, unknown pids 4096,4097,4098
I think these pids disappear later on in the day sometimes.
With ipcleaner I get  "stream format not supported" but, if I go into ip/dvb mode and a record mac address it almost plays w/VLC.

__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
midwestmac

Registered:
Posts: 2,275
Reply with quote  #2 
Or to add to this I don't if this a new signal format that Tsreader doesn't understand
because I get a program table with a video pid and 2 audio pids
So I am a little confused with it.
That looks like this
satmex6unkown.JPG


__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
andyinyakima

Avatar / Picture

Registered:
Posts: 1,520
Reply with quote  #3 
mac,

Here's what I get with updateDVB.

If you notice SR is less than yours so is it off now,
I have seen SR's change before but not often, but new equipment is coming on line with GS so
who knows what's gonna happen??

EDIT: Using tune-s2 this transponder is the first one that needed to be exactly on frequency
to lock. If I use 12091 or 12093 it would not lock. That's with my equipment (other results may vary)
standard disclaimer....[biggrin]

Attached Images
Click image for larger version - Name: Screenshot_from_2014-12-16_09:11:16.png, Views: 60, Size: 485.62 KB 

__________________
andyinyakima
-----------------------------------
Recs: TBS6983, TBS5925 __ Ant: 90cm on SG6100__OSes: Linux with v4l-updatelee drivers __ RPi2 with v4l-updatelee drivers

Open Book, Open Source, You have to Open it to Know what's in it!

midwestmac

Registered:
Posts: 2,275
Reply with quote  #4 
Its still there, I'm pretty sure I'm on 113w
Try an lock
11804 H 17500 data
12048 H 14300 Reuters Tv news
or
12080 H 25633 Mux

Then flip over to the Vert side and try

ADDED: Its weak I have it 9.3db's and there isn't really a peak on the spectrum scan
Its right in between two peaks, you might say its in the valley.[smile]

__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
fenelon

Registered:
Posts: 1,026
Reply with quote  #5 
Thats been there for a while when I scan 12090 V 3616 3/4 QPSK with Smartdvb comes up sid 3 says mpeg 2 video and 2 audio but just black screen.
If you try with transedit you see all info.
midwestmac

Registered:
Posts: 2,275
Reply with quote  #6 
Oh ok thanks Fenelon! I'll try that. I did get a recording of it for mips earlier. 
__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
andyinyakima

Avatar / Picture

Registered:
Posts: 1,520
Reply with quote  #7 
mac,

All of the H channels came in as you stated in your message.
But my screenshots ..... is what I get.

what do you get with tune-s2?

Attached Images
Click image for larger version - Name: Screenshot_from_2014-12-16_12:33:15.png, Views: 58, Size: 281.72 KB  Click image for larger version - Name: Screenshot_from_2014-12-16_12:40:03.png, Views: 56, Size: 42.85 KB 

__________________
andyinyakima
-----------------------------------
Recs: TBS6983, TBS5925 __ Ant: 90cm on SG6100__OSes: Linux with v4l-updatelee drivers __ RPi2 with v4l-updatelee drivers

Open Book, Open Source, You have to Open it to Know what's in it!

midwestmac

Registered:
Posts: 2,275
Reply with quote  #8 
I have XP running right now. Thats strange? Your getting the wrong freq. Its still there.
Edit: or SR# 

__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
wejones

Avatar / Picture

Registered:
Posts: 5,638
Reply with quote  #9 
I'm seeing the transponder that Midwestmac shows, although I'm seeing it at
12090 V 3617
It has a PMT with PID 48, which lists the A/V streams at 49/52/54, however the A/V PIDs don't exist on the transponder, which is why it doesn't show any video.  It's the 4098 and 4097 PIDs that are carrying IP/DVB data with UDP streams.

Right next to the above transponder, I'm also seeing a 12093 V 1879 transponder.  This one is ACM/VCM spending most time in QPSK, 8PSK, and 16APSK, and shows up as continuous in TSREADER, so TSREADER won't decode it. 

midwestmac

Registered:
Posts: 2,275
Reply with quote  #10 
Thanks Wejones, that should help him. I see now, had to blindscan those in. Boy those are really close together.

I now have
12091 V 3617
12095 V 1879 ACM
then another
12105 V 2603 ACM

WOW! thats crazy

__________________
Azbox Ultra, Pansat 2500, Prof7301,Tbs 6925,5980, Genpix 8psk card, Dektec 2137c, Hauppauge 950q
andyinyakima

Avatar / Picture

Registered:
Posts: 1,520
Reply with quote  #11 
Quote:
Originally Posted by midwestmac
Thanks Wejones, that should help him. I see now, had to blindscan those in. Boy those are really close together.

I now have
12091 V 3617
12095 V 1879 ACM
then another
12105 V 2603 ACM

WOW! thats crazy


Ok,

Finally mine shows up at 12088 V 3617, 12095 V 1878, and 12102 V 2603.
But everyone knows mine is the most accurate......[rofl]

Seriously though I think I can change my LOF and fix my search results.

This is where NIT comes in handy it will state the frequency and SR in the table sometimes.



__________________
andyinyakima
-----------------------------------
Recs: TBS6983, TBS5925 __ Ant: 90cm on SG6100__OSes: Linux with v4l-updatelee drivers __ RPi2 with v4l-updatelee drivers

Open Book, Open Source, You have to Open it to Know what's in it!
photoman76

Registered:
Posts: 9,284
Reply with quote  #12 
Thanks to MIPS, Ipcleaner V0.44m works fine for this mux.

It  seems to be some sort of video distribution system.
One video referred to this:

http://catalogs.infocommiq.com/AVCat/images/documents/pdfs/DS_MediaPlanCM_nov08.pdf
KOSMO

Avatar / Picture

Registered:
Posts: 815
Reply with quote  #13 
can someone tell me What is UPDATEDVB where do I get Hardware? S/W?
Cost?
etc

Is there a link to a synopsis?

__________________
Taylors, SC LinkBox 9000i, AZBox Prem+, Fortec Star 90cm with H-H Motor & Invacom (Ku) Linear/Circ 4 output LNBF, 7.5' UniMesh  56" fiberglass Prime feed with invacom SNH-031 (Ku).
wejones

Avatar / Picture

Registered:
Posts: 5,638
Reply with quote  #14 
Quote:
Originally Posted by photoman76
Thanks to MIPS, Ipcleaner V0.44m works fine for this mux.

It  seems to be some sort of video distribution system.
One video referred to this:

http://catalogs.infocommiq.com/AVCat/images/documents/pdfs/DS_MediaPlanCM_nov08.pdf


Neat.   According to the web page, if you buy into their system, you get a computer with a 120 GB hard drive, running Windows 2000!  
  I guess I shouldn't laugh, since I still have a Win2K computer running here, but I thought I was about the last person on earth still using it. 
    {The reason I'm still using it is that it's the last OS that TSREADER is fully functional on. }

  On the other hand, since the URL for the page ends with "nov08.pdf", perhaps this is no longer their current web page.




KOSMO

Avatar / Picture

Registered:
Posts: 815
Reply with quote  #15 
does Haupage work?
__________________
Taylors, SC LinkBox 9000i, AZBox Prem+, Fortec Star 90cm with H-H Motor & Invacom (Ku) Linear/Circ 4 output LNBF, 7.5' UniMesh  56" fiberglass Prime feed with invacom SNH-031 (Ku).
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!