Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment  
markus19

Registered:
Posts: 59
Reply with quote  #1 
I'm using dvbdream with my dvb card and have the following setup.

dvb -> positioner -> zinwell 4x8 powered multiswitch (22khz off) -> dish_1
dvb -> positioner -> zinwell 4x8 powered multiswitch (22khz on) -> dish_2

Everything works fine with the positioner connected to dish_1 (22 khz off). However, I'm not able to control the positioner connected to dish_2 (should be 22 khz on for the switch). I have the satellite config in dvbdream set to 22 khz on and I can view the chans on dish_2, so the tv viewing part for dish_2 is working, but If I send any diseqc commands for controlling this positioner it doesn't work. If I connect directly from dvb -> positioner -> dish_2 then controlling the positioner works fine.
boblop

Avatar / Picture

Registered:
Posts: 2,769
Reply with quote  #2 
http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/Reference%20docs/bus_spec.pdf

Not every thing with F connectors will "play well" together.

__________________

Never throw it away--almost never!

a33

Registered:
Posts: 28
Reply with quote  #3 
So, after https://rickcaylor.websitetoolbox.com/post/diseqc-commands-and-power-inserter-8432162?&trail=15
and https://rickcaylor.websitetoolbox.com/post/multiswitch-and-positioner-8443623?pid=1295106814
we have now come to the next chapter (it helps to read back the setup and history -- for me you could have stayed on the same topic without starting a new one, allbeit that the title wouldn't be accurate anymore...).

A problem like yours I have encountered while using a long cable, of somewhat dubious quality.
Do you have a pure copper center lead in your cable, or CCS (Copper cladded steel)? And how long is your cable to dish 2?

Furthermore I'm not sure why you need the 22kHz on the second multiswitch? But that might be because I'm not 100% familiar with American setups.

BTW Can you please report back at your earlier topic if your problem of temporary signal cutoffs for 1-2 seconds when receivers are switched on/off is now definately fixed? Allways nice to have reports back, of how things are or arenot solved. [smile]

Greetz,
A33
Hockeynut

Avatar / Picture

Registered:
Posts: 9,428
Reply with quote  #4 
With good multiswitch going to Diseqc switch this is not a problem..Done it here.
__________________
Dish`s--10' KTI,10' Button Hook,10' Unimesh x2, 12' Cosmos,8 1/2 foot Birdview in the works.
1.2 Ch Masters parked at 91,103,105...1.2 Ch Master on a factory Ch Master polar mount tracking from 58-127.
Positioners--Gbox,Vbox and ASC1`s
Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,Pansat 9500,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!