Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment  
majortom

Avatar / Picture

Registered:
Posts: 4,757
Reply with quote  #1 
I think this post deserves recycling here

http://rickcaylor.websitetoolbox.com/post/openbox-pal-problem-5129643?highlight=openbox+pal+problem&pid=1267595420#post1267595420

It's the blindman's instructions to set the box from PAL SD to 1080P_60 when ur stuck with no HDMI and using
the component YUV inputs and ya can't see the display.

fixed mine again, after fumbling thru the buttons inadvertantly screwing up the tv system settings.

Another note if ur ever flashing by serial, the null modem cable should just be pins 2,3 swapped plus GND
Ignore the RTS, CTS, DTR, DSR lines.


__________________
Perfect 10 7.5' mesh Chapparal C/Ku Co-Rotor feed, Norsat 8115 CBAND, Norsat 4106A Ku Thomson Saginaw Actuator, Vbox positioner,
Home Brew Polarotor683 Servo circuit. Openbox S9, Prof7500, v4l-updatelee linux drivers installed.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!