Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment  
JimGood

Avatar / Picture

Registered:
Posts: 58
Reply with quote  #1 
Rick put some tv channels from G19 Sat onto my wetek receiver but I am trying for the 1st time to scan a Satellite but I don't know how to get to the list when I click on theater it just goes to the  channel list. I can't get to configure my type of dish etc. my setup is different then Ricks as I am using a lnbf but can't get to any screen for configuring my set up thanks.
__________________
2 4dtv 922's openbox s9  1- Wetek play receiver 1-12 ft. Paraclipse mesh dish and 10 ft. Prodelein solid dish.
EmilNJ

Avatar / Picture

Moderator
Registered:
Posts: 3,553
Reply with quote  #2 
While in Wetek Theater press the button right below the power button on the remote that has 3 horizontal lines.  This will take you into Antennae setup.  Wetek Theater just puts every channel you scan in a big list and doesn't sort by satellite.  

You would have to create a separate favorite list for each satellite and name it for the satellite.  

Emil

__________________
Icecrypt 1600 CHD SE, Icecrypt 3750 CHD, Linkbox 9000i Local, Wetek Play, SYNOQ SR1, 2 AZBOX ME's, AZBOX Premium Plus & Elite HD, Manhattan RS1933, Openbox S10, Vantage HD1100S, Prof 7500, Pansat 9200HD w/S2+board, 2 Quali-TV's, Sonicview 8000HD, Toshiba TRX 2220, Motorola DSR905, 10ft Winegard, 90cm Ariza, etc.......
JimGood

Avatar / Picture

Registered:
Posts: 58
Reply with quote  #3 
Thanks EmilNJ That is what I was  missing I got it to work it took some effort but I got it First I was not on the satellite I thought I was (f1 ) I was on 1 of the mex satelites but I moved the dish up from there where I thought f1 was and it scanned in the sat and got all of the channels. But now my problem is I don't have all of the sats programmed in the proper place and I don't have a way of knowing if I am getting a signal with out the cables connected to the 4dtv receiver to program them in the correct place. I guess I will just go by trial and error from F1 . But at least it's working thanks to you and other members I want to say thanks again.
__________________
2 4dtv 922's openbox s9  1- Wetek play receiver 1-12 ft. Paraclipse mesh dish and 10 ft. Prodelein solid dish.
JimGood

Avatar / Picture

Registered:
Posts: 58
Reply with quote  #4 
I was looking at putting favorite Sats in the list but I'm not sure how to do it.  And 1 more thing I tried  scanning for Ku but it looks like duplicate of C-band I set the freq from 5150 too 9000/10600 or 9000/10750 it scans a lot of channels and locks them but I'm pretty sure they're just C-band ???
__________________
2 4dtv 922's openbox s9  1- Wetek play receiver 1-12 ft. Paraclipse mesh dish and 10 ft. Prodelein solid dish.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!