Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment  
assemblersat

Registered:
Posts: 41
Reply with quote  #1 
Hello,
my PC  Intel I7 3,6 Ghz 16GB win 7 ultimate x64 with TBS6903

since update to EBSpro 16.0.0.1 and also 16.0.0.2 a scan with "BLS Mode" EBSpro not found DVB-S  Transponders, found  only DVB-S2 Transponders
"RF Scan" shows all Transponders but get no Lock on DVB-S Transponders
with "BLS2 Mode" all Transponders where found (DVB-S and DVB-S2)

also make a "clean install "with V 16.0.0.1 and 16.0.0.2 but same problem

EBSpro V.16.0.0.0 is all OK
please have a look at the inserted photos and Files

txt EBSpro.log.txt     
txt Logdatei.txt     
BLS astra.JPG  BLS2 astra.JPG  EBSpro 16002 Astra.JPG  EBSpro DVB-S no lock astra.JPG  EBSpro lock astra.JPG 


__________________
motorized dish 1m 75E to 45W
TBS5925 TBS6983  TBS 6903 TBS5520SE TBS 6522 TBS 5927 Oktagon OTLO LNC
crazycat

Avatar / Picture

Registered:
Posts: 1,048
Reply with quote  #2 
so use BLScan2 mode always [smile] this always better for stv0910
__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
assemblersat

Registered:
Posts: 41
Reply with quote  #3 
Thank you Crazycat

 i prefer BLS Mode i have also TBS USB Devices installed on my pc
and i have most of time  better search results  at BLS Mode

regards werner
v16.0.0.0 Pilot Auto.jpg  v16.0.0.2 Pilot Auto.jpg


__________________
motorized dish 1m 75E to 45W
TBS5925 TBS6983  TBS 6903 TBS5520SE TBS 6522 TBS 5927 Oktagon OTLO LNC
Derrick

Registered:
Posts: 200
Reply with quote  #4 
For DVB-S pilot doesn't exist [wink]
assemblersat

Registered:
Posts: 41
Reply with quote  #5 
Hello Derrick
thank you for reply
have you a idea to the DVB-S problem?
regards werner

__________________
motorized dish 1m 75E to 45W
TBS5925 TBS6983  TBS 6903 TBS5520SE TBS 6522 TBS 5927 Oktagon OTLO LNC
Derrick

Registered:
Posts: 200
Reply with quote  #6 
What problem? Maybe "Auto" should be replaced by "-" [wink]
assemblersat

Registered:
Posts: 41
Reply with quote  #7 
Hello Derrick  [wink]

the indication "on" "off" "auto" is not my problem
the problem i have is i cannot get lock at all DVB-S Transponders
??? No one else has the same problem with the tbs 6903 and EBSpro  V16.0.0.1 and 16.0.0.2 ??? [confused]

__________________
motorized dish 1m 75E to 45W
TBS5925 TBS6983  TBS 6903 TBS5520SE TBS 6522 TBS 5927 Oktagon OTLO LNC
assemblersat

Registered:
Posts: 41
Reply with quote  #8 
Hello,
EBSpro v.16.0.0.1 and 16.0.0.2 problem with finding DVB-S Signals is solved [smile]
with Crazycat`s  NEW Streamreader  V. 1.2.4.32
1.JPG 
https://sourceforge.net/projects/crazyscan/files/

Thank you Crazycat


__________________
motorized dish 1m 75E to 45W
TBS5925 TBS6983  TBS 6903 TBS5520SE TBS 6522 TBS 5927 Oktagon OTLO LNC
crazycat

Avatar / Picture

Registered:
Posts: 1,048
Reply with quote  #9 
enjoy [smile]
__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
Deviance

Registered:
Posts: 6
Reply with quote  #10 
Hello, I have Prof7500 USB, I can use multi-switch disecq 1.1 wit dvbdream, dvbviewer, progdvb, but I can't use smartdvb and ebspro. I used CrazyBDA and Prof7500_Driver_2.0.0.7_W64_fixed drivers and latest streamreader. The result is same. Disecq 1.0 4 ports working perfectly. Any suggestions? Thanks...
crazycat

Avatar / Picture

Registered:
Posts: 1,048
Reply with quote  #11 
Multi-switch is diseqc 1.0 :-) diseqc 1.1 is 4-16 port switch.
__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
big_hemi

Avatar / Picture

Moderator
Registered:
Posts: 4,933
Reply with quote  #12 
Quote:
Originally Posted by crazycat
Multi-switch is diseqc 1.0 :-) diseqc 1.1 is 4-16 port switch.

My diseqc 1.1 is 8x1 switch, not sure if this means anything or not as far as your drivers go...

__________________
10' Winegard - BSC621 C/Ku LNBF - Venture MA818-B24 - V-Box 7 - 8x1 Switch
1.2m Prodelin @ 103W | 90CM @ 72W | 1m Muzak @ 91W | 1m DS3100 (HH120 motor) | All Avenger Universal Ku LNBF's
Icecrypt 3750 & 1600 - Linkbox 9000i Local - AZbox ME (OpenATV 3.3.1) - Prof 7500 - Wetek - Slingbox HD Pro
Deviance

Registered:
Posts: 6
Reply with quote  #13 
I have BAFF 8/1 DiseqC Switch and I think, that isn't a driver problem but it is a software problem. Same driver (by the way big thanks to crazycat), different software, some of them work some them don't work. Maybe next releases, the problem will be fixed. Thanks..
Comptech

Avatar / Picture

Registered:
Posts: 534
Reply with quote  #14 
Craztcat, I have a TBS 6903 that won't change polarities. I run a Ortho feed C band setup right now with a modded WNC 4x8 switch. Are you saying I have to use Diseq settings for a switch like this instead of  relying on the software to switch from vertical to horizontal by 13/18 volt presence?
__________________
12 foot Unimesh, Pansat DP4 Feed with four Norsat Pll LNB's. Micro HD, Wetek Play and a TBS 6903 PCIe card.Modded WNC 4x8 switch for power. Radio equipment, SDR Play, whistler 1088 and a whistler TRX1. Long wire dipole for HF and a scantenna 2 For VHF and UHF. And of course RS 800 antennas for the road.
crazycat

Avatar / Picture

Registered:
Posts: 1,048
Reply with quote  #15 
So check LNB voltage from 6903 card.
Use voltmeter or simple satfinder with LNB voltage/22KHz indicator.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!