Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 4 of 8      Prev   1   2   3   4   5   6   7   Next   »
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #46 
  • New function GetSignalExEx(bool *Present, bool *Lock, int *RFLevel, float *SNR, float *BER)
  • Optimized GetSignal(), GetSignalStrength(), Statistic(), GetSignalEx(), GetSignalExEx().
CrazyScan 1.0.1.56
  • Using new function GetSignalExEx() for update signal info (only if SignalInfo() not supported). REQUIRE StreamReaderEx-BDA 1.1.0.1045 and newer.
  • Visual BlindScan performed only for visible polarization curve.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
tempo

Registered:
Posts: 205
Reply with quote  #47 
There wasn't updates info for a long time, so better late than never. Changelog is below:

StreamReaderEx-BDA 1.1.0.1060
  • RFScan speed-up for STV6110/STv090x based cards in software tuner control mode (upto 20% faster).
  • Support for TBS6926 prototype (the upcoming card with new wide-band tuner chip, supporting frequencies 250-2300 MHz).
  • Fixed tuning for 'specific' DVB-S2 transponders for TBS6925/6926 (non transport streams).
  • MultiPLP support for DVB-T2/C2 - there are changes in SEARCH_RESULT2 structure for SignalInfo2(), also new function SetChannel2Ex() with option to select the substream (Physical Layer Pipe).
  • TDA182x2/CXD2820r support engine changed - the spectrum now with 6MHz bandwidth, plus MultiPLP support.
  • Preliminary support for terrestial/cable TBS 5880, 5280 cards for USB2.0 bus. Waiting for the new drivers from TBS with I2C-access.
StreamReaderEx-BDA 1.1.0.1088.
  • Full support for NetUP Dual DVB-S2-CI card (2xSTV6110+STV0900) with improved driver added. For cards with STV0900AAC it is available to activate single-mode in config file - DemodMode=0 option.
  • Full support for KNC1 TV-Station DVB-S2 Twin (2xIX2470+STV09000BAC) card added. LNB input connector number (LNB1/LNB2) should be selected in config file (both tuner-filter names are equal, thus it is impossible to autodetect the input number). New option DemodMode = 1 means first input LNB1 used, 2 means second LNB2, 0 - means first input LNB1 in single-mode.
  • There are changes in SEARCH_RESULT2 structure - PLP ID and CellID+NetID list added.  MultiPLP support updated, now real PLP ID used (required testing in countries where DVB-T2 MultiPLP test broadcasting used).
  • For RFScan2() function scan standard can be set in addition. This is actual for multistandard cable-terrestial demodulators.
  • SetChannel2Ex() function has new parameter "standard", also for multistandard demodulators for neat lock standard selection (in AUTO-mode demod tried to lock all supported standards in priority (sequence) DVB-T - > DVB-T2 -> DVB-C -> DVB-C2). If DVB-T selected, then first demod tried to lock as DVB-T, then DVB-T2 (such strategy will be for future DVB-C/C2 also).
  • New functions IQScan2()IQScan2Range() - Constellation monitoring support for terrestial-cable devices. Usage example see in CrazyScan2.


CrazyScan 1.0.1.57
  • 'Visual' BlindScan available for usage after first pass in Loop spectrum mode (bugfix).
CrazyScan 1.0.1.66
  • Streaming mode (TCP/UDP) selection added. UDP works not very reliable (dependent on CPU throughput and its usage), so it is recommended to use TCP as before. 
  • Sound alarm for 'Visual' blindscan added (used sounds from step.wavlock.wav files).


CrazyScan2 1.0.0.58
  • MultiPLP support in Carrier Search dialog added. StreamReaderEx-BDA 1.1.0.1060 and newer required.
CrazyScan2 1.0.0.63
  • MultiPLP support changed (testing required).
  • CellID (DVB-T/T2) and NetID (DVB-T2) added to the list of detected carrier parameters.
  • Scan standard selection.
  • Carrier search standard selection.
  • Constelltion-monitoring support updated with new functions IQScan2()IQScan2Range().
  • StreamReaderEx-BDA 1.1.0.1088 and newer required.
CrazyScan2 1.0.0.66
  • Streaming mode (TCP/UDP) selection added. UDP works not very reliable (dependent on CPU throughput and its usage), so it is recommended to use TCP as before. 
  • Cosmetic fixes in carrier search dialog.


AirScan 1.0.0.1062
  • MultiPLP support in txt-log. StreamReaderEx-BDA 1.1.0.1060 and newer required.
AirScan 1.0.0.1089
  • MultiPLP support updated - real PLP ID values uses now.
  • Added transponders list export to Enigma2 format (xml).
  • StreamReaderEx-BDA 1.1.0.1088 and newer required.


BLScan 1.1.0.1087
BLScan2 1.1.0.1087
  • Fixed transponders list export to Enigma2 format (FEC and pilot, rolloff for DVB-S2 added).


P.S. StreamReaderEx-SDK updated (API, AirScan, BLScan, BLScan2, StreamReader-Demo).

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #48 
CrazyScan 1.0.1.70
  • Positioner control dialog (button in diseqc group and Ctrl+P)
  • Show RFLevel,SNR,BER in Carrier Search dialog without lock. Possible invoke positioner control (Ctrl+P).
  • Save Search range in settings (default now 5MHz)
  • Font and color markup for main signal and modulation params.
CrazyScan2 1.0.0.71
  • Subcarrier selection (OFDM) for constellation monitoring + loop mode for all subcarrier (10 points for each)

  • IQScan2() fixes for CXD2820r-based devices.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #49 
CrazyScan 1.0.1.73 & CrazyScan2 1.0.0.73
  • Store main window maximize state in settings on exit and restore on start
  • Fullscreen mode on action Ctrl+F

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #50 
CrazyScan 1.0.1.77 & CrazyScan2 1.0.0.77
  • Arrange settings as tab widget

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #51 
CrazyScan 1.0.1.78
  • Fix LNB settings reading on start

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #52 
  • Partial support for TDA10086-based devices like Technotrend Budget S-1401, Connect S-2400; Technisat SkyStar USB Plus; Pinnacle 400e, 450e.
  • Fix Pinnacle 452e support.
  • Fix STV6110 AGC->RFLevel calibration table.
  • New option RFLevel in streamreader.ini : 0 - dBm(default), 1 - dBmV, 2 - dBµV
  • RFScan option restricted : 0 - raw AGC integrator values, 1 - dB (default, depend from RFLevel option)

CrazyScan 1.0.1.83 & CrazyScan2 1.0.1.83
  • Remember last settings tab on exit and restore on start.
  • Support for five stream analyzer profiles (first-time need select name, executable path and command-line parameters). Initial predefined profiles for TSReader an VLC with TCP streaming mode.
  • Read RFLevel option from streamreader.ini on start and select captions and initial RFLevel values. Recomended StreamReaderEx-BDA 1.1.0.1150 and newer.
  • If BLScan() not supported set initial Symbol Rate to 27500Ks in Carrier Search dialog.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #53 
  • Fixed Tuner IC init for STV090x cut 2.0 (TT S2-1600, Omicom S2 with STV0903BAB)
  • Fixed TS bus init for KNC DVB-S2 Twin, Netup Dual DVB-S2-CI.
  • Support for STV090x-based Blackgold PCI-E devices with SAA7231 media-bridge. Tested BGT3630 (single) and BGT3595,3600 (dual).

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
aceblaggard

Registered:
Posts: 48
Reply with quote  #54 
I reinstalled Crazyscan yesterday and notice the latest versions haven't been added to this thread. If you've not been to the Sourceforge site recently the current release is CrazyScan 1.0.1.96 and StreamReaderEx-BDA 1.1.0.1172


No idea what all the updates are as there's no changelog as far as I can find nor any documented details on the additional features or their settings in the ini file but if you use a diseqc motor the control options seem to have been expanded from what I remember of them.

You may also need to update the lib files from here http://sourceforge.net/projects/crazyscan/files/ReqLibs.rar/download

__________________
Prof Tuner 7301, 1.2m Gibertini + Inverto B Ultra. 68.5E-63W Ku Band. Prof 8000, 1.8m Precision PF + ESX241/PLL C1W/Inverto Black Pro 40E-63W Ku/C-band. Skybox F3, 1m Gibertini, Inverto B Ultra. 45E-63W Ku Band. 50.81°N 0.00001E
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #55 
See actual changelog @ CrazyScan Blog
Actual info about supported devices @ CrazyScan Wiki

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #56 
StreamReaderEx-BDA 1.1.0.1172-mod
  • Fixed BDA filter connction in some cases.
  • Fixed bitrate calculation for cable/terresrial devices.
  • Fixed TS bus config for TeVii DS300x-based devices
  • Support for second-generation DS3103-based TeVii devices (S662, S482). Require driver 5.1.8.5+.
  • Minor fixes for LNB power control IC (LNBP21, LNBH23/24, IS6422/23)
CrazyScan 1.0.1.99 (beta)
  • Save transponder info in various format


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
xm11

Registered:
Posts: 52
Reply with quote  #57 
the last crazy scam not working 21.7
miss streamreder.dll please upload it
tempo

Registered:
Posts: 205
Reply with quote  #58 
StreamReaderEx-BDA  1.2.0.1202
  • New function ModSel() - setting modcode filter. Realized for STV090x only.
  • Real stream bitrate from STV090x demod registers instead of calculated by modulation parameters.
  • Mode DVB-S2 TS FIFO has changed for STV090x for some devices (with revision 3.0 chips), for better DVB-S2 VCM TS support (as example EUMETCast @10E service).
  • Support for devices based on TMAX TAS210x improved. Added detection of demodulator TAS2100/2101 version and optimised carrier search functions for each one. Testing needed, especially for devices with TAS2101 - TBS 6922SE, 5922SE, 6928SE, 6991SE, 6982, 6985.
P.S. StreamReaderEx-SDK updated (API).

CrazyScan 1.0.2.105
  • New option to set Modcode-filter for S2-transponder in carrier search dialog. Can be used before streaming, and available only if S2-transponder found and device support ModSel() function. StreamReaderEx-BDA 1.2.0.1200+ should be used. 
  • Bitrate value update in carrier search dialog, if modulation parameters update enabled.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #59 
AirScan 1.0.0.1225
  • Show more info about DVB-T2 muxes.
  • StreamReaderEx-BDA 1.2.0.1223 and newer required !

BLScan 1.2.0.1247
BLScan2 1.2.0.1247
  • Show unlockable transponder in report.
StreamReaderEx-BDA  1.2.2.1260
  • Rewriten CXD2820R support. Extended SingnalInfo2 with specific DVB-T2 params (app must be recompiled).
  • Full TBS 6983, 6908 support with direct hw control STV6120/STV0910AD.
  • New function ModInv() - detection available frame modcodes for DVB-S2 transponders. Implemented only for STV091x (now only TBS 6983, 6983).

P.S. StreamReaderEx-SDK updated (API, AirScan, BLScan, BLScan2).

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,024
Reply with quote  #60 
CrazyScan2 1.0.2.117
  • Show more info about DVB-T2 muxes (S1 signaling type, Pilot pattern, Payload type).
  • StreamReaderEx-BDA 1.2.0.1223 and newer required !
CrazyScan 1.0.2.118

  • Modcode selection simplified.
  • Detect available frame modcodes for DVB-S2 transponders in Carrier search dialog (if ModInv() supported).
  • Mark unlockable transponders and ACM/VCM.
  • User-defined freq ranges selection in Range tab. Predefined ranges defined in ranges.txt file.
  • Move some style-specific checkboxes to Style tab.
  • Save BLScan2 checkbox state in settings.
  • StreamReaderEx-BDA 1.2.2.1248 and newer required.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!