Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 7      Prev   1   2   3   4   5   6   Next   »
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #31 

StreamReaderEx-BDA 1.0.8.806

  • Added basic support for Compro BDA (VideoMate S300,S350,S500), AnySee BDA, Genpix BDA (3dparty and original). DiseqC, ToneBurst, RC (for AnySee). Custom tune and Signal Stat for modern Genpix BDA drivers. Need testing with StreamReaderDemo
  • Extended API for new standard (DCII) and modulations (OQPSK and DCII-specific).
BLScan 1.0.0.806
  • read IFStart, IFStop, LNBMid options from streamreader.ini on start. So possible extend acceptable frequency range beyond 'standard'  950-2150Mhz

CrazyScan 1.0.1.9

  • Just added new modulations in BL&IQScan dialog. Not used anyway
P.S. SDK and samples sources updated.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #32 

StreamReaderEx-BDA 1.0.8.820

  • Stability fixes
  • Update LNB voltage control for new drivers TBS6925V2, 5925, 5980.

CrazyScan 1.0.1.10

  • Fixed modulation info update
  • Added Romanian translation.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #33 

StreamReaderEx-BDA 1.0.8.844

  • Fixed transport stream speed configuring on TBS/Prof USB.
  • Common engine improvement for terrestial/cable/exotic hardware with BDA-drivers. Added ISDB-T/S, ATSC in device detection, extended standard and modulation types in API.
P.S. SDK and samples sources updated.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #34 
BLScan2 1.0.0.932
  • Special version for vendor-implemented BlindScan algo (BLScan2() function in StreamReaderEx)
  • Use same config format as BLScan, but some params not used and ignored (Min,MaxSR, Min,MaxSNR, Step).
  • Use latest StreamReaderEx-BDA. Now supported TBS with native BlindScan (used driver implementation) and Montage DS300x based TeVii and Geniatech devices (direct chip control)
BLScan 1.0.0.948
  • VDR transponder info format support (with some extensions for APSK, multistream)
  • Optimized carrier step-up

CrazyScan 1.0.1.27

  • 'Visual BlindScan' feature - BlindScan all freq range after success RFScan (BlindScan button on toolbar). BLScan and BLScan2 algo can be used (BLScan used if both features supported by device). In BLScan mode showed current freq marker and possible select scan step 3-10Mhz
  • Carrier width marking now optional
  • Stop scan/streaming in Blind&IQScan dialog on window closing
  • BlindScan'on'click available only when BLScan feature supported by device
  • Updated info about supported devices with last StreamReaderEx-BDA on CrazyScan Wiki

P.S. SDK and samples sources updated.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #35 

CrazyScan 1.0.1.31

  • Show SNR on transponder marker.
  • Reset RF-spectrum before new scan.
  • Disable BlindScan button after device change and diseqc send.

StreamReaderEx-BDA 1.0.9.960

  • IR RC support for TBS SAA7160-based cards (NEC encoding as RAW, and RC5).
  • Compro VideoMate S300/350 basic support fixed (DiseqC 1.x, ToneBurst).
  • Twinhan BDA support optimized.
  • New TMAX-based TBS 6982, 6991 detection added.

P.S. All changes in StreamReaderEx-BDA related to basic functions, no any improvements in scanning features.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #36 

CrazyScan 1.0.1.33

  • Decreased minimal BlindScan step to 2Mhz
  • Show precise value of SNR on transponder marker

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #37 

StreamReaderEx-BDA 1.0.9.970

  • Fixed Carrier width calculation in SignalInfo().
  • Fixed and tested Technotrend S-1501 support (STV0288-based, full-support RF,BL,IQScan).
  • Extend Bestunar/DVBSky RC support (RAW and RC5 now)/

CrazyScan 1.0.1.40

  • Fix setting draw line width on startup.
  • Use Marker color for plot picker text.
  • Title color now always black.
  • Remove all markers before BlindScan.
  • Clear old spectrum draw before new RFScan.
  • 'Carrier search' dialog now invoked for all devices with BLScan() or SignalInfo() support.
  • Optional 'strick lock' mode instead BlindScan in 'Carrier search' dialog - new checkbox 'BlindScan'. In 'strick lock' mode need set correct SR and optional standard (need for ultra-low SR DVBS transponders, SR < 1000). If device not support BLScan - checkbox 'BlindScan' disabled and available only 'strick lock' mode (now for STB0899 and Montage DS300x/3103 based devices).
  • Extended SR range to 100-50000Ks.



__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
tempo

Registered:
Posts: 205
Reply with quote  #38 

StreamReaderEx-BDA 1.0.9.995

  • Added full support for TBS cards based on AV2011/TAS2100(TMAX) tuner/demod through direct chip control - RFScan(), BLScan(), BLscan2(), IQScan(), SignalInfo() and all DiseqC/ToneBurst modes.
  • Optimised support of LNB voltage switching for TBS cards, the last drivers needed (December 2011 or more new).
  • BLScan2() can be used with TBS 5980, 5925/6925 only if direct control of chips disabled (HWControl=0 in streamreader.ini)
Support for TMAX-based cards tested with TBS 6922, 6928, 8922, 5922 and with TechnoTrend S2-4100 (ODM-version of TBS 6922). For TBS 5922 the driver with working I2C-access should be installed (at the moment pre-release version 2.0.2.8).

Blindscan on TMAX demod works fast, but the low SR that can be found in blindscan mode is about 1600 kS/s (but cards itself can receive the signal from SR=1000). Restriction by SR=1600 applies only for blindscan mode.

BLScan 1.1.0.994
BLScan2 1.1.0.994
  • Fixed frequency rounding for transponder INI file generation.
  • Range of possible MinSR for BLScan extended to 100-50000 KS/s.

CrazyScan 1.0.1.42

  • Quantity of transponders found during blindscan and blindscan time now writes in spectrum graph header.
  • Added selection of BlindScan function (BLScan or BLScan2) when both functions supported by device (see BlindScan2 checkbox).
P.S. SDK and samples sources updated.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
tempo

Registered:
Posts: 205
Reply with quote  #39 

StreamReaderEx-BDA 1.1.0.1014

  • Optimized RFLevel-from-AGC calculation for STV090x demods. RFLevel always corrected to reference BBGain value (6dB for STV6110, 8dB for STB6100). This doesn't matter for STV6110, but the spectrum for STB6100 became more informative.
  • Added full support for sat devices based on tuners/demods Zarlink ZL10039/ZL10313 (since 2007 produced under label Intel CE5037-9/CE6313). All functions realized: RF,BL,IQScan; SignalInfo. Compro S300, S350, Avermedia A706, A707 supported now.
  • Added output of DiseqC-commands to log file for SendDiseqCmd(), SendDiseqCmdEx() functions.
 
Zarlink-based "old horses" shows good speed and quality in spectrum mode. Minimal tuner bandwidth 4-5 MHz (not worse than STV6110), high resolution AGC (14 bit) and fast tuner programming caused this result.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #40 

StreamReaderEx-BDA 1.1.0.1021


BLScan 1.1.0.1023
BLScan2 1.1.0.1023
  • KaBand Inverto LNB support (LOF=20000-22000 as high-lof). Require StreamReaderEx-BDA 1.1.0.1021 and newer !
  • New transponder format in xml for Enigma2 (with extended field mis for multistream transponders), see default config BLScan.ini for details.

CrazyScan 1.0.1.49

  • KaBand Inverto LNB support (LOF=20000-22000 as high-lof). Require StreamReaderEx-BDA 1.1.0.1021 and newer !
  • Optional redraw plot after each RFScan call. Disable redraw for 2-3x speed-up spectrum scanning (but spectrum updated only after range scan on one polarization).
  • Default search range for BlindScan now 2MHz.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #41 

StreamReaderEx-BDA 1.1.0.1025

  • More precise SNR value for Montage DS300x,3103.
CrazyScan 1.0.1.50
  • Translations updated.

__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
Ekkehard

Registered:
Posts: 4
Reply with quote  #42 
I made an include unit for Delphi, for those who want to use the StreamReader.dll with that compiler :-)

 
Attached Files
zip UStreamReaderInclude.zip (7.91 KB, 95 views)

tempo

Registered:
Posts: 205
Reply with quote  #43 
  • New function PLSSel - PL-descrambler control (mode and 18-bit code). New function realized for all supported STV090x-based devices. Detailed info given in DVB-S2 EN 302 307 standard - p.30, point 5.5.4, Physical layer scrambling.
 
CrazyScan 1.0.1.52
  • Control of DVB-S2 PL descrambler in carrier search dialog window. There is possibility to select mode of code (Root, Gold and Combo) and code (1-262143). If specify PL = 0, then auto-search of code (full range 1-262143) will be enabled. For search speed-up it is desirable to select DVB-S2 modulation standard, also select MinSR >> 1000 ks/s, if carrier on the spectrum has big width (i.e. SR>10000 ks/s).
 
P.S. StreamReaderEx-SDK updated.
 
P.P.S. Mediaset multistream transponders on Hotbird 13E have PL = Root, 8.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
crazycat

Avatar / Picture

Registered:
Posts: 1,016
Reply with quote  #44 
CrazyScan 1.0.1.53

  • Search PLS code from specified number.


__________________
Strong offset dish 0.95m on Powertech DG240 motor + ALPS BSTE8-751B Ku-Universal LNB. Variant CA-902 0.95 offset dish with 3xDreamSat DS-8 Ku-Universal LNBs (13E+4.8E+4W) + Variant CA-600 Ku-Circular LNB 36E + DiseqC 1.0. STB: GI8120 Lite. PC DVB: Omicom S2 PCI; TBS 6983 PCI; TBS QBox-CI USB(5980), 5927.
tempo

Registered:
Posts: 205
Reply with quote  #45 
CrazyScan 1.0.1.54
  • Added frequency range selection by mouse for 'visual' blindscan on the spectrum window.
If frequency range selected, then blindscan will operate with this range, otherwise blindscan will work for full band, as before in previous versions.

__________________
Two 90 cm dishes on Strong SRT DM-2100 motors with Ku band LNBs.
STBs: Openbox X810, Openbox X820, Dr.HD F16 Blue Edition.
DVB cards in use: Prof 7301, Prof 8000, TT S2-1600, Omicom S2 PCI rev.3 (STV0903BAB, STV0903BAC, STV0900AAC demods), Prof 7500, Skystar2 rev.2.6D, TT S-1401, TBS 5922, TBS 5925, TBS 6922.
DVB cards in reserve: Prof 7300, TBS 6921, X3M SU1600HD, X3M SPC1400HD, Acorp DS110, Acorp DS120, DVBWorld PCI2004D, DVBWorld USB2104D, TT S2-3200, SkyStar HD USB, SkyStar S2, Skystar2 rev.2.3, SB 340-USB, SB 540-PCI, Tevii S464/S470/S471/S660/S420
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!