Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 3      Prev   1   2   3
vendig

Avatar / Picture

Registered:
Posts: 994
Reply with quote  #31 
Since there has been way too many pm's asking for the setup options on the ACC program here it is:

Open the ACC program.
click on connections
add the profile name.....
now add the ip address that is on the azbox your trying to connect to........
User on Azbox is:  root   all lower case.
Pass on Azbox is : azbox  all lower case.
FTP port is : 21
Telenet port : 23

The two small check boxes to the right of the FTP port and Telenet port here have only the Binary checked.
Command Prompt should have in it.... ]$


This should allow the ACC program to see your azbox if you have put in your correct ip address and have the connections on the Azbox set to allow for it to connect to the internet and FTP connection enabled under your settings menu on the azbox.

Any questions on the setup or connections should be addressed in this thread so others may see it later on if they do not understand and for allowing others to answer the questions.  Doing it by PM does not give others the help they may need in the future.



__________________

[image]
boomer_106

Avatar / Picture

Registered:
Posts: 2,834
Reply with quote  #32 
Quote:
Originally Posted by vendig

The ACC program can also be used to change a channel on your recevier and show you different screen shots of what is currently playing right on your pc.
To do this you click on Mini RC then use the gray remote on the bottom left of the screen. also clicking on the connect button next to the gray remote and then clicking on GET SCR SD or HD will allow the picture to appear as it does in this picutre of the soccer match.

The up and down arrow keys will change the channels as per what is in your recevier. The left and right arrows will also do the same as if you press the ok button on your remote and use the arrow keys to go to specific channels.

 Of course you need to make sure your connection is set properly as explained in the first post here.


[image]




I was trying to get the picture on my screen tonight. I couldn't get it. I was able to change the channel with the pc though so I know I was connected. 


__________________
10 ft mesh BUD. Uniden Supra analog c/ku, Pansat 9200 HD, Azbox Elite, chaparral co-rotor 2, Astrotel Precision Model PMJ-LNB (C) 15 K noise. Eagle Aspen 770 KU O.6 DB LNB, Venture Ball Screw MA818-B24
Hockeynut

Avatar / Picture

Registered:
Posts: 9,330
Reply with quote  #33 
It works here boom..Is flaky tho!..If a screenshot is what ya want Maz works much better.
__________________
Dish`s--10' KTI,10' Button Hook,10' Unimesh x2, 12' Cosmos,8 1/2 foot Birdview in the works.
1.2 Ch Masters parked at 91,103,105...1.2 Ch Master on a factory Ch Master polar mount tracking from 58-127.
Positioners--Gbox,Vbox and ASC1`s
Receivers--AZMe,AZPlus,AZElite,Icecrypt S1600 HD,Pansat 9500,VU Solo2 SE,Octagon SF4008 UHD 4K,Prof 7500,TBS 6982.

boomer_106

Avatar / Picture

Registered:
Posts: 2,834
Reply with quote  #34 
Quote:
Originally Posted by Hockeynut
It works here boom..Is flaky tho!..If a screenshot is what ya want Maz works much better.


Thanks Jeff. I hadn't realized that feature was there. It's not a big deal.  I had to restore my sat list which was the reason for logging in to begin with. The sat list held for a long time.

I think I'm very soon I am going to take this thing apart and have a look at the capacitors. I've got to fix the flakiness. A lot of times, it won't even pick up a signal. 

__________________
10 ft mesh BUD. Uniden Supra analog c/ku, Pansat 9200 HD, Azbox Elite, chaparral co-rotor 2, Astrotel Precision Model PMJ-LNB (C) 15 K noise. Eagle Aspen 770 KU O.6 DB LNB, Venture Ball Screw MA818-B24
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!