Welcome to GOFASTMOTORSPORTS.com ... ... ... Green Flag - Green Flag - Go Go Go ... ... Brought to you by Ricks Satellite - Where the Big Dish Rules!

Ricks Satellite Wildfeed and Backhaul Forum
Register New Posts Chat
 
 
 


Reply
 
Author Comment
 
RickCaylor

Avatar / Picture

Moderator
Registered: 10/01/07
Posts: 6,081
Reply with quote  #1 

This TV and Me TV will discontinue all transmissions on SES 2 (Formerly AMC 3) effective on 05/17/2012.

 

Both will be on SES 1 - 15 C-Band @ 101 Degrees West.

 

This TV

3984MHz Vertical SR2734 FEC 5/6

 

Me TV

4014MHz Vertical SR5924 FEC 5/6


__________________
Sorry, but I do not use the PM (Private Messenger).
Please e-mail me if need to make contact @ rickcaylor@aol.com.
Keep your eyes on the Sky!
DarkSky

Registered: 01/01/12
Posts: 1,091
Reply with quote  #2 
What about AMC1 is it going to stay. The ones on ses1 are skewed a little funny for me.

__________________
7 1/2' mesh dish with BSC621-2 lnb. Manhattan and Linkbox 8000HD Local receivers. 39" x 29" Primestar dish and lnb motorized by SG2100 motor and Prof 7301 DVB card.
RickCaylor

Avatar / Picture

Moderator
Registered: 10/01/07
Posts: 6,081
Reply with quote  #3 

Quote:
Originally Posted by DarkSky
What about AMC1 is it going to stay. The ones on ses1 are skewed a little funny for me.

As far as I know, they will remain on SES 1.  Affiliates have been told to re-aim their dishes.

 

Not sure about the ones on AMC 1.


__________________
Sorry, but I do not use the PM (Private Messenger).
Please e-mail me if need to make contact @ rickcaylor@aol.com.
Keep your eyes on the Sky!
DarkSky

Registered: 01/01/12
Posts: 1,091
Reply with quote  #4 
I can see them on amc1 from previous scan but lately they will not scan in on a tp scan on my manhattan.

__________________
7 1/2' mesh dish with BSC621-2 lnb. Manhattan and Linkbox 8000HD Local receivers. 39" x 29" Primestar dish and lnb motorized by SG2100 motor and Prof 7301 DVB card.
joemfl1

Avatar / Picture

Registered: 08/31/08
Posts: 651
Reply with quote  #5 

thanks rick,as i mentioned i cant pull 1 on 101 in some odd reson but i can get in this tv their but not me tv


__________________
joe morrison;Die hard washington redskins fan since day i was born,
DarkSky

Registered: 01/01/12
Posts: 1,091
Reply with quote  #6 
Quote:
Originally Posted by joemfl1

thanks rick,as i mentioned i cant pull 1 on 101 in some odd reson but i can get in this tv their but not me tv



Joe I have to bump my dish a little east or west for best signals depending on which one I want to view on SES1. I can find a point where I can see both but they are weak signals.

__________________
7 1/2' mesh dish with BSC621-2 lnb. Manhattan and Linkbox 8000HD Local receivers. 39" x 29" Primestar dish and lnb motorized by SG2100 motor and Prof 7301 DVB card.
RFSAT

Avatar / Picture

Registered: 11/28/08
Posts: 110
Reply with quote  #7 
Considering AMC-1 and SES-1 are next to each other I seriously doubt they would stay on AMC-1.  I scanned in THIS on SES-1 ok. Not getting any Quality on ME on SES-1 I tried manual pid entry as I did on AMC-1 to no avail. If anyone gets ME on SES-1 please let us all know!

Thanks!

__________________
12FT Sami (Noaaport)SES-1; 10FT Sami 58W to 139W; DSR-922,920, Az Ultra (2X); Az Premium+; AzMe; Vantage 1100s non working; Coolsat 5000; Prof 7500;Amiko Alien/8240
DarkSky

Registered: 01/01/12
Posts: 1,091
Reply with quote  #8 
Quote:
Originally Posted by RFSAT
Considering AMC-1 and SES-1 are next to each other I seriously doubt they would stay on AMC-1.  I scanned in THIS on SES-1 ok. Not getting any Quality on ME on SES-1 I tried manual pid entry as I did on AMC-1 to no avail. If anyone gets ME on SES-1 please let us all know!

Thanks!


I have to go 2 clicks west with my actuator to get ME1 and ME2. (Hope that is right. I get confused on my clickin. LOL)

__________________
7 1/2' mesh dish with BSC621-2 lnb. Manhattan and Linkbox 8000HD Local receivers. 39" x 29" Primestar dish and lnb motorized by SG2100 motor and Prof 7301 DVB card.
vendig

Avatar / Picture

Registered: 07/28/10
Posts: 935
Reply with quote  #9 
Quote:
Originally Posted by RickCaylor
<p>
Quote:
Originally Posted by DarkSky
What about AMC1 is it going to stay. The ones on ses1 are skewed a little funny for me.<br>
</p><p>As far as I know, they will remain on SES 1 (AMC 1).  Affiliates have been told to re-aim their dishes.</p>


SES-1 is at 101.0W and this is where the signals are located.

AMC-1 is at 103.0W and this is not the satellite the affiliates were told to use.

It is very easy for people to confuse these 2 satellites so lets keep this in order.

The signals Rick posted are for 101.0W which is SES-1.
joemfl1

Avatar / Picture

Registered: 08/31/08
Posts: 651
Reply with quote  #10 

Thats what i was doing,Hockey told me count 11 both ways,still no luck,other channels came in fine,still getting me on 97  so I hope it stays their ,I love this network hate to loose it


__________________
joe morrison;Die hard washington redskins fan since day i was born,
DarkSky

Registered: 01/01/12
Posts: 1,091
Reply with quote  #11 
Quote:
Originally Posted by vendig
Quote:
Originally Posted by RickCaylor
<p>
Quote:
Originally Posted by DarkSky
What about AMC1 is it going to stay. The ones on ses1 are skewed a little funny for me.<br>
</p><p>As far as I know, they will remain on SES 1 (AMC 1).  Affiliates have been told to re-aim their dishes.</p>


SES-1 is at 101.0W and this is where the signals are located.

AMC-1 is at 103.0W and this is not the satellite the affiliates were told to use.

It is very easy for people to confuse these 2 satellites so lets keep this in order.

The signals Rick posted are for 101.0W which is SES-1.



I do not have them confused. I had them scanned a while back on 103. I can still view them but can not scan them in.

AMC1  3740 V 29270    ME and THIS

__________________
7 1/2' mesh dish with BSC621-2 lnb. Manhattan and Linkbox 8000HD Local receivers. 39" x 29" Primestar dish and lnb motorized by SG2100 motor and Prof 7301 DVB card.
vendig

Avatar / Picture

Registered: 07/28/10
Posts: 935
Reply with quote  #12 
Darksky,

The signals we are talking about are on SES-1

You are confusing the signals we are discussing here.
You are on a totally different satellite then what we are talking about.
snowman

Avatar / Picture

Registered: 11/30/10
Posts: 995
Reply with quote  #13 
I thought that the ME-TV and THIS-TV feed that is HIDDEN is on AMC1. Am I wrong about this? I have it in my sat box as AMC1 and it comes in right in line with ION, PBS and all the AMC1 stuff.

Is there yet a 2nd feed on SES1 currently that is NOT hidden? Or is there something happening where the signal on my setup comes in 2 degrees off SES1??

Thanks =)


__________________
Openbox S9HD PVR, Amiko 8240 PVR, prof 7500 usb, tbs5922 usb. 9ft Aluminum DH Sat Dish with dual linear Ku/C LNBF (DMX741). QARL-3624 Moteck 24" Super PowerJack Heavy Duty Actuator.
Can see 56W to 137W
Helios

Avatar / Picture

Registered: 02/08/09
Posts: 81
Reply with quote  #14 
On my Coolsat 8100 HD, I cannot get them (hidden) on AMC 1 (103W), but they are scanning fine (I did it just one hour ago) on SES 1 (101W).

Helios

__________________
KTI XTI-10 Mesh BUD ****** Corotor II Plus **** VanWeise 24" **** Norsat 8515 CBand **** 4506A KuBand **** Drake 1724 ***** GeoSatPro MicroHD*** Kubuntu
vendig

Avatar / Picture

Registered: 07/28/10
Posts: 935
Reply with quote  #15 
Quote:
Originally Posted by snowman
I thought that the ME-TV and THIS-TV feed that is HIDDEN is on AMC1. Am I wrong about this? I have it in my sat box as AMC1 and it comes in right in line with ION, PBS and all the AMC1 stuff.<br><br>Is there yet a 2nd feed on SES1 currently that is NOT hidden? Or is there something happening where the signal on my setup comes in 2 degrees off SES1??<br><br>Thanks =)<br><br>


These have been here for some time now.
Re-read the first post in this thread.
here it is for you once again.

>>
This TV and Me TV will discontinue all transmissions on SES 2 (Formerly AMC 3) effective on 05/17/2012.

Both will be on SES 1 - 15 C-Band (101.0W)

This TV

3984MHz Vertical SR2734 FEC 5/6


Me TV

4014MHz Vertical SR5924 FEC 5/6
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Fellow Members, your posts are welcome here! Do not worry about posting everything perfect. Different receivers and LNB's will give you different Frequencies and Symbol Rates. Some set top boxes, PCI cards and USB receivers, Do Not Require all of the same information that others may need. It is not Required to post everything that others may need to tune in a feed. It is just most important to share the find. We can always adjust the Frequency and Symbol Rates and try the various Modulations and FEC's on our own receivers until we get a lock and then give a polite reply with what works for your receiver, as that information might help others as well. We all appreciate the efforts and energy of the Posters!

Thank You for Visiting GOFASTMOTORSPORTS.com - Keep Your Eyes on the Sky and the Track!

Powered by Website Toolbox - Create a Website Forum Hosting, Guestbook Hosting, or Website Chat Room for your website.